background image

• Turn off the power switch and wait until the motor completely stops.
• With dry hands, unplug the power cord from electrical outlet. 
• Disassemble the machine. (See disassembly instructions.)
•  Wipe base with a soft damp cloth or sponge. Do not submerge base in water.  

Do not spray with water or any other liquid. Base is not dishwasher safe.

•  We recommend washing the pusher by hand in warm soapy water. Due to 

temperature differences in dishwashers if you choose to wash the pusher in the 

dishwasher, place it on top rack only.

•  Clean all other parts in warm, soapy water. A mild detergent is recommended. Rinse 

well and dry thoroughly. All components are dishwasher safe with the exception of  

the base. Do not use in European Import or a commercial dishwasher.

•  To clean the filter and blade, hold them under warm running water. Use a soft- 

bristled dish washing brush gently to completely clean pulp from filter. Rinse  

the filter from the outside under running water.

•  Dry components thoroughly then assemble the machine and turn the power  

on to spin out any excess water.

•  Make sure unit and parts are completely dry then store in a cool, dry place.
• We recommend removing and washing juice spout after each use.

Cleaning Your Power Juicer

To Clean Main Unit:

To Clean Juice Spout:

STEP 

1

:

 

Locate removable juice 

spout locking mechanism 

on the bottom side of 

receptacle.

Note:

 Juice spout will be  

in the locked position.

STEP 

2

:

  

To unlock, turn locking 

mechanism counter-

clockwise, lining up 

notch with juicer spout 

hinge pivot arm.

IMPORTANT:

 

When reattaching juice spout back into original position make sure 

juice spout is in the locked position and tightly secured before use.

STEP 

3

:

 

Lift up juice spout carefully 

from receptacle and remove 

to clean.

TO REATTACH:

 insert juice 

spout back into original  

position and turn the locking 

mechanism clockwise to  

lock into place.

Locking 

Mechanism

Hinge  

Pivot Arm

Juice Spout

LOCKED POSITION

UNLOCKED POSITION

STEP 

5

Use the crescent tool to  

remove the blade. Place the  

two pegs at either end of the 

crescent tool into the two  

holes on the blade. Press  

down and turn counter- 

clockwise while holding filter  

and receptacle to unlock 

the blade. Remove blade  

carefully.

 POWER JUICER 

ELITE

Cleaning Your Power Juicer

13

Disassembly/Main Unit

   Note:

 Refer to page  

6 for all part names.

Summary of Contents for Elite

















Reviews: