background image

   

Important Safeguards

Parts & Accessories 

SAVE THESE INSTRUCTIONS

For Household Use Only

Anyone who has not fully read and understood all operating 

and safety instructions contained in this manual is not qualified 

to operate or clean this appliance.

SAFETY FEATURES

The Fusion Juicer

TM

 was designed with safety in mind.

We have added two important safety features:

Built-In Automatic Shut Off System

The Fusion Juicer

TM

 is equipped with a special feature that 

automatically shuts off the motor should the unit become jammed 

or overheated during the juicing process. Prior to shut down, you will 

most likely hear the juicer get louder. This will indicate that something has 

caused the motor to strain. Should this happen, simply turn the Power 

Switch off and unplug the unit. Follow the Disassembly, Cleaning and 

Assembly procedures, then allow the unit to cool for 10 minutes. The unit 

will reset and you will be able to resume the juicing process. 

The Locking Bar

When in the upright and locked position, this feature holds the Juicer Lid/

Pulp Guard in place. If the Locking Bar is not in its proper position, the 

motor will not engage and the blade will not spin.

2

Summary of Contents for Fusion Juicer SHL-90

















Reviews: