11
Troubleshooting
Problem Reason/Solution
Unit does not
Unit does not
run when
run when
switched on.
switched on.
• Check to see if unit is plugged in.
• Locking bar is not locked in place properly.
• Check if all parts are assembled properly.
• Check if there is any residue left between
blade and receptacle.
• Make sure you wait 5-10 minutes to
restart if machine automatically shuts down.
Motor is
unusually loud
and vibrating
• Check that all parts are assembled properly
and in the correct position.
• Juicing overripe fruit may result in too much
pulp and will clog the filter. Turn machine off
and clean the filter.
The motor overheats
causing the power
to automatically
shut off
• You may have applied too much pressure
with the pusher while processing causing
the motor to accidentally over heat. This
activates the built-in Thermal Cut Off
Switch. The motor will temporarily stop
working for approximately 10 minutes
to cool down. See additional information
on page 2.
• The fruits and vegetables may be soft
or over ripe.
• There may be too much pulp in the filter.
Turn machine off and clean the filter.
No juice is coming
out of the spout
• Make sure the non-drip spout is in the down
position while juicing. If it is in the upright
position the juice will not come out. It may
overflow out the bottom sides.
Summary of Contents for Fusion Juicer SHL-90
Page 15: ......
