Care & Cleaning
10
All of the components with the exception of the motor base can be put in your home
dishwasher. We recommend top rack placement as temperatures near the bottom
drying element may vary with manufacturer.*
• Turn off the power switch and wait until the motor completely stops.
• With dry hands, unplug the power cord from electrical outlet.
• Disassemble the machine. (See disassembly instructions pages 4).
• Wipe base with a soft damp cloth or sponge. Do not submerge
base in water. Do not spray with water or any other liquid. Base
is not dishwasher safe.
Important: Do not use abrasive sponges, cloths or cleansers as these
can damage the finish.
• Use the cleaning brush supplied (never a wire brush) to loosen the
leftover fibers that may be stuck to the filter before placing it in the
dishwasher.
• Clean all other parts in warm, soapy water. A mild detergent is
recommended. Rinse well and dry thoroughly.
• To clean the filter and blade, hold them under warm running water.
Use a bristled dish washing brush to gently clean pulp from filter.
Rinse the filter from the outside under running water. If your sink has
a spray hose attachment, this is especially effective for loosening fiber
from the filter and the blade.
• Dry components thoroughly then assemble the machine and turn
the power on to spin out any excess water.
• Make sure unit and parts are completely dry then store in a
cool, dry place.
*Caution: Some commercial and foreign made dishwashers may reach internal
temperatures that are higher than machines made for home use by U.S. standards.
Do not use these dishwashers with your Fusion Juicer. The higher temperatures may
cause damage to your juicer voiding your warranty. Check with your dishwasher
manufacturer before using.
Summary of Contents for Fusion Juicer SHL-90
Page 15: ......
