123
JACK POSITION
The base of the jack should be placed on firm, level ground.
The jack should be positioned as shown in the drawing.
RAISING THE CAR
Install the jack handle into the jack as shown in drawing. To raise the vehicle,
close the valve 1 by turning it clockwise and move the jack handle2 up and
down.
WARNING:
Do not get under the car when it is supported by the jack! The vehicle could
fall and cause serious injury or death. No one should stay in the car while the
jack is being used.
122
2. Block the Wheel
Block the wheel that is diagonally opposite from the flat to keep the vehicle
from rolling when the car is raised on the jack.
3. Loosen Wheel Nuts
The wheel nuts should be loosened slightly before raising the car.
1) Tire wheel
2) Wheel nut
NOTE:
Make sure that the rear outer tires are raised on a jack when they have to be
replaced. Do not attempt replacing the outer tire with the inner tire placed on a
kerb stone.
CAUTION:
Be careful not to hurt yourself when changing a flat tire.
OWNER
’
S MANUAL
JAC HEAVY DUTY TRUCK
