GN9350e
GN9330e
GN9330e USB
7.2 Headset’s visual indicators
Visual indication
Headset action
Link indicator (blue)
Flashing when linked up
Lit for 2 seconds
Successful pairing, including adding headsets in conference mode
Lit (during adjustment)
Receive volume reorientation (+/-) is being adjusted
Flashing rapidly
Headset in DECT/GAP mode
GN9350e
GN9330e
GN9330e USB
7.3 Base’s visual indicators
Base action
Visual indication
Telephone mode button’s indicator/
Base talk button
Lit when in telephone mode and flashing when linked up
USB mode button’s indicator/Base talk button
Lit when in USB mode and flashing when linked up
Mute functionality indicator (red)
Lit when mute is activated
Battery indicator (4 green diodes)
1 indicator light = 25% of a full charge
2 indicator lights = 50%
3 indicator lights = 75%
4 indicator lights = 100% full charge
Rightmost lit diode flashes when charging, leftmost diodes are lit
Leftmost diode flashes when <30 minutes of talk time remaining
When headset placed in cradle for charging, all diodes light for
1 second
Battery indicator (chargecradle for
additional battery, GN accessory)
Lit when charging, green diode
Important:
During everyday use, the base’s leftmost indicator will flash when there is less than 30 minutes
of talk time left.
GN9350e
GN9330e
GN9330e USB
6.2 Replacing the battery pack
The headset’s battery pack can be changed when required.
To replace the battery pack on a wearing style:
1. Unclip the wearing style from the battery pack.
2. Slide the backside of the headset speaker-housing
downwards.
3. Slide the new battery pack (from the extra battery
charging facility) onto the headset.
The headset’s link indicator will light for 2 seconds to
confirm successful replacement of the battery pack. This also confirms that the battery has
sufficient charge to operate.
4. Replace the wearing style.
5. Recharge the empty battery by sliding it into the extra accessory charging cradle.
7. Audio and visual indicators
The headset and base have audio and visual indicators that represent various functions
associated with setting up and using the product.
GN9350e
GN9330e
GN9330e USB
7.1 Headset’s audio indicator
Headset action
Audio indication
Low battery
5 rapid beeps + 20 second pause
Volume up/down
1 quick beep in increasing/decreasing intensity
Volume max/min reached
1 rapid shrill/low beep
Incoming call (with RHL functionality)
Rapid multi-tone + 2 second pause (repeats)
Incoming call (with VoIP call)
Depends on VoIP application
Conference call request
4-pitch tone
Conference call accept
1 beep
Telephone line (open/close)
1 beep
Headset out of range
3-pitch tone
Mute activation/deactivation
1 beep
Mute activated
2-pitch tone + 10 second pause (repeats)
18
19
