28
To install your Jabra LINk™ 14201-20 EHS
adapter with your Toshiba phone, just follow
these simple steps::
SEttingS
1. Install your headset solution to your desk
phone according to the headset manual.
2. Set “Clear dial tone switch” in “A” position
– see headset manual.
3. If you are connecting to an older Toshiba
deskphone model, we recommend to
try switch setting “G”, for best possible
compatibility.
4. Ensure your headset base unit EHS mode is
set up to RHL – see headset manual.
connEctionS
5. With the cable included with your headset
system, connect the phone socket in your
headset base unit to the phone socket on
your Jabra LINk™ EHS Adapter.
6. With the cable marked white A, B, or C,
connect the Headset/Handset socket
on your Jabra LINk™ EHS Adapter to the
headset socket on your desk phone - ensure
you select the right cable for your Toshiba
desktop phone. See the Cable Matrix
section.
7. With the cable marked purple, connect
the 2.5 mm jack to the ring tone detector
socket in the Jabra LINk™ EHS Adapter, and
place the ring sensor as close as possible to
the ringer sound outlet on your desk phone.
8. With the cable marked red, connect the
AUX socket on your headset base unit to
the Jabra LINk™ EHS Adapter AUX socket.
For more information and disclaimer, visit www.jabra.com/toshiba
ElEctronic Hook SwitcH (EHS) SolutionS for toSHiba
Plug-and-Play With lEading uniFiEd communicationS aPPlicationS
Unified Communications integrates technologies such as voice, email and instant
messaging and facilitates enhanced productivity and collaboration by unifying and
streamlining the way we communicate. Our headsets are plug-and-play with all
leading Unified Communications applications.
www.jabra.com/uc
SEt up information
