Jabra BT330 User Manual Download Page 5

Page: 5 / 38

lis

“Pair” to your Bluetooth headset

Pairing2 creates a unique wireless link between two Bluetooth devices, such as your
Bluetooth phone and Bluetooth headset.
1. Make sure the headset is turned off (see

Turning headset on/off

section).

2. Press and hold the answer/end button until you see a

solid

blue light.

3. Set your Bluetooth phone to “discover” the headset by following your phone’s

instruction guide. Typically, the steps involve going to a “setup”, “connect”, or
“Bluetooth” menu

on your phone

and then selecting the option to “discover” a

Bluetooth device.

4. When your phone finds the “Jabra BT330”, it asks if you want to pair with it. Confirm

this by selecting “yes” or “ok”.

5. When your phone asks for a

passkey or PIN4, enter 0000 (4 zeros)

from your

keypad and then press “yes” or “ok”.

IMPORTANT:

If pairing is successful, the blue indicator light flashes rapidly before

returning to flashing every 3 seconds. If pairing is unsuccessful, the light remains solid
and you’ll need to reattempt pairing (see steps 3–5 above).

BASIC OPERATIONS

Turning

headset on and off

To turn your headset on and off, press and hold the answer/end button until you see a
burst of four flashes on the blue indicator light. A single tone indicates that the headset
has turned on or off.
When the headset is on, the indicator light flashes. When it is off, the light is unlit.

Note:

Do not hold the button down for more than 3 to 5 seconds when turning the

headset on or else it may go into pairing mode and the blue indicator light will turn
solid. If that happens, turn off the headset, wait 3 to 5 seconds and then repeat the
process for turning the headset on.

IMPORTANT:

Note

Choosing wearing preference

For optimal performance, wear your Jabra BT330 and your Bluetooth phone on the
same side of your body.  In general, you will get better performance when there are no
obstructions (including parts of your body) between the headset and the phone.  The
headset ear grip is placed over the front of the ear.  Your headset is ready to wear on the
right ear, but you can adjust the ear grip to hang from your left ear.

(See fig. 3)

1.  Hold the headset with the speaker facing you.
2.  Flip the ear grip down.
3.  Rotate the ear grip in a half-circle, counter clockwise.
4.  Place the headset over your left ear with the grip toward the front.

Making a call

Make sure the headset is turned on.
Using the phone’s keypad dial the number on the keypad and then press the Send key.

Ending

a call

To end a call, press the answer/end button, or press the button to end a call on your
phone’s keypad.

Answering

a call

From the headset:

When you hear the phone ring, press the answer/end button once.

From the phone:

Press the button to answer a call on your phone’s keypad. Depending

on your phone, you may then need to tap the answer/end button once to transfer the
call to your headset.

TIPS AND SOLUTIONS

Enhanced

features

Enhanced features are available for phones that support the hands-free Bluetooth

Enhanced features are available for phones that support the hands-free Bluetooth
profile4

Enhanced features are available for phones that support the hands-free Bluetooth

, meaning you can use your headset wirelessly with your phone for some

features. Check your phone’s instruction guide or contact the phone manufacturer
if you are not sure if your phone supports the hands-free Bluetooth profile.