www.jaboboat.com Email: [email protected]
Phone:189 2833 0369
14
4.. Then, close the upper cover and secure the knob to lock the cover
5.Open the waterproof cover, press the power switch, the two tail lights start to flash.
Schematic diagram of fishing line lanyard:
Make a lasso at a suitable position of the fishing line, insert the lasso between the two semicircular
retaining rings in the front section of the tipping bucket, and hang the lasso on the fixed post.
Then put down the tipping bucket and tighten the cable sleeve under the tipping bucket cover.
Common problems when using the nest boat:
1 The nest boat cannot return to the set starting point or is far away from the set nest point when
returning:
This situation is mainly because the time to set the starting point is relatively short after the boat is
turned on, and the receiver has not received the GPS signal stably. Improved method After the
boat is turned on, delay 3-5 minutes to set the starting point, or press the N key to select the “set
starting point” option to reset the starting point after returning home.
2 How to check the distance traveled by the nest boat: Press the up key 3 times, the screen
displays:
0: XXXX m Here is 0; it shows the distance of the boat from the starting point
X: XXXX m X: shows the distance from the boat to the target point
3 What to do if the round-trip trajectory when navigating the nest boat is not a straight line, but a
