background image

www.jaboboat.com Email: [email protected]

Phone:189 2833 0369

13

10.

What needs special attention is

: if the power switch of the remote control is turned off first,

and the boat has left the surface at this time, the motor on the boat will start to rotate. This
situation is not a malfunction, but the boat is starting to "automatically return". The method is to
turn off the boat's power switch.
11. If the boat's switch is turned off during use and then turned on again, but the remote control
switch has not been turned off, the remote control cannot control the boat. At this time, just turn
off the remote control switch and turn it on again to operate.
12. When using more than two remote controllers at the same time, don't be surprised if two
remote controllers control a boat at the same time. Just set the remote controllers with different
serial numbers.

The use of night lights:

In order to facilitate the operation of fishing friends during night fishing. We set up the night flight
lights on the cabin cover. When the night flight lights are used, the night flight lights can be turned
on or off by the remote control. There is an independent night light switch button on the
JABO2AG/2BG remote control. Press it once to turn on the light, and press it again to turn off the
light.

Battery installation:

1.Twist the hatch cover press buckle.

2. Connect the battery plug to the socket inside the boat

3.Note: The red wire on the plug should be connected to the socket, and the black wire on the plug
should be connected to the socket.

Summary of Contents for Jabo-2AG/2BG
















Reviews: