background image

www.jaboboat.com Email: [email protected]

Phone:189 2833 0369

12

The remote control is equipped with a lithium battery when it leaves the factory.

When the remote control is low in power, you can use the charging cable provided

with the boat to plug it into the mobile phone charger to charge the remote control.

The charging port of the remote control is on the back, and the general charging time

is 1.5-2 hours.

When charging, the horizontal bar on the remote control screen starts to scroll, and the

3 horizontal bars no longer scroll when it is full, and the display is full.

Precautions:

1. Before using, the lithium battery in the nesting boat must be charged to ensure that the battery is
fully charged.
2. The remote control must also be fully charged.
4. When the battery voltage of the nest boat is too low, the two indicator lights on the boat will
flash at the same time, indicating that the battery should be charged at this time, and the battery
indicator on the remote control will also indicate that the battery is reduced.

Special note

: After each use, the boat’s power switch should be turned off and the battery plug

should be unplugged to prevent the battery from over-discharge damage due to long-term slow
discharge.
5. The JABO-2 series remote control nest boat is suitable for use in reservoirs, lakes, and ponds. It
cannot be used on flowing water to avoid being washed away by currents. Not suitable for use on
water with wind and waves. Cannot be used in sea water.
6. If during the fishing moratorium, keep the inside of the nesting hull dry, unplug the battery, and
charge the power battery every 2-3 months. The lithium battery is in the best storage state at
70%-80%.
7. Please lock the cover press buckle before use. Put on the switch waterproof cap.
8. The weight of bait shall not be greater than 1.5kg.
9. It is forbidden to forcibly lift the bait bin with external force. Otherwise, it is extremely easy to
damage the drive mechanism of the bait bin.

Summary of Contents for Jabo-2AG/2BG
















Reviews: