User manual -
JABLOTRON Mercury
2
MMD510307
PARTIAL SETTING:
If your alarm has a partial setting enabled, only selected detectors are armed.
It‘s activated by authorizing and pressing the ARM button (confi rmed by the yellow LED indicator on
the right button). If the keypad is confi gured to allow full arming, it is activated by double-pressing
the ARM button after a valid authorization (confi rmed by the red LED indicator on the right button ).
ENTRY AND EXIT DELAY:
Is indicated by the keypad beeping. Exit time is the time frame during
which you must vacate the premises of the protected area before the system becomes armed.
Entry time is the time frame during which you must disarm the alarm system, otherwise an alarm
is triggered. The specifi c times are confi gured by your JABLOTRON Installation Partner.
ALARM CANCELLATION:
Authorize yourself and press the DISARM button.
ALARM MEMORY:
The red LED remains fl ashing after an alarm event. To cancel this indication,
repeat the disarming (by authorizing and pressing the DISARM button).
KEYPAD WITH A DISPLAY
It allows the user to control up to 4 independent sections of the house. In addition, it features
a MENU that can be used to view the event memory and other information.
AUTHORIZATION:
You must always enter your valid access code or use an RFID tag/card on the
keypad before using the ARM or DISARM buttons. The validity of the authorization is confi rmed by the
green fl ashing of the light bar.
PARTIAL SETTING:
if your alarm utilizes partial setting in any section, it is activated by authorizing
and pressing the corresponding ARM button (the yellow LED on the right). Pressing the ARM
button twice after authorization will fully arm the section (red LED on the right).
ENTRY AND EXIT DELAY:
Indicated by the keypad beeping. Exit time is the time frame during
which you must vacate the premises of the protected area before the system becomes armed.
Entry time is the time frame during which you must disarm the alarm system, otherwise an alarm is
triggered. The specifi c times are confi gured by your JABLOTRON Installation Partner.
ALARM CANCELLATION:
Authorize yourself and press the DISARM button, which is fl ashing red.
ALARM MEMORY:
The red LED remains fl ashing after an alarm event. To cancel this indication,
repeat the disarming (by authorizing and pressing the DISARM button).
INTERNAL KEYPAD MENU
−
EVENT MEMORY
– overview of the history recorded in the alarm
−
SYSTEM STATUS
– overview of alarm and device status
−
DISPLAY OPTIONS*
– display contrast and backlight
* this setting is available only to the alarm administrator.
DISPLAY
t l
t 4 i d
d
t
ti
f th h
Green
– disarmed
Green fl ashing
–
entry delay
Green
– everything is OK
Green fl ashing
–
valid authorization
Red fl ashing
– alarm
(or alarm memory)
Yellow
– fault
Yellow
– Partial setting
Red
– armed
Red fl ashing
– alarm
(or alarm memory)
DISARM
button
ARM
button
