jablotron JA-60GSM, User Manual

Page: 6 / 12

User manual JA-60GSM - 6 - MFJ51808
- 6 - MFJ51006
3. 73 ____ F0
- ALARM SMS
- ALARM CALL (audible warning)
4. 74 ____ F0
5. 75 ____ F0
- Any ALARM, ARMING & DISARMING SMS.
- ALARM CALL (audible warning)
- Technical SMS
6. 76 ____ F0
7. 77 ____ F0
- ALARM CALL (audible warning)
8.
Technical SMS about events in the system. This position is
reserved for service organization.
3. Customization of SMS and audible warnings

The dialer can report all possible events of the alarm system via SMS (see table 3.2.1.).

There are factory default SMS texts available for all possible events and for all possible
sources of the events. All texts can be edited.

It is possible to set which events will be reported to which telephone number.

It is possible to set which events should activate audible warnings.

It is possible to change incoming SMS command texts, which are used for remote controlling of
the system.
The control panel must be in the user mode (see section 2) to be able to use the following
programming sequences:
3.1. Events to be reported by SMS
Table 3.2.1 shows the complete list of all possible events in the alarm system. It also shows which
events are assigned to which telephone numbers to be reported via SMS. You can make your own
setting by:
81 uu t y
where:
uu is an event index from 01 to 31
t is a telephone number memory from1 to 7
y 0 = reporting disabled, 1 = reporting enabled
Example: if you enter 810371 and a Fire alarm is triggered (event index 03) by detector number 1, the
following message will be sent to the 7th telephone number: “Alarm system reports: Fire alarm
Wireless detector #1 Time: 16.04. 11:16”
Note: SMS reports consist of 4 text parts (installation name, event name, source name and time)
– all
of these texts can be edited, see section 3.3 for details.
3.2. Assignment of audible warnings to be reported
Table 3.2.1 also shows the complete list of all possible events in the alarm system. It shows which
events are assigned to which telephone numbers to be audibly reported. You can make your own
setting by:
82 uu t y
where:
uu is an event index from 01 to 31
t is a telephone number memory from1 to 7
y 0 = reporting disabled, 1 = reporting enabled