jablotron Azor, User Manual

Page: 13 / 25

- 13 - MLO51206
Communication test
− Call Azor from an enrolled telephone (A).
− Press 9 (C) in the voice menu (B).
− Detector testing mode should be activated.
− Activate the detectors and the RFID tag reader one after another (D).
− Test a motion detector by opening and closing its cover.
− Test a door-opening detector by opening and closing its cover.
− Press the UNSET button to activate the RFID tag reader.
− Azor will confirm detector activation with a voice message to the user’s telephone
number.
− End the call to finish testing or press # on the phone keypad.
Tips and specifications

The test can start only when Azor is unset

If Azor fails to send a report confirming detector activation, check:

Whether the detector batteries have been installed properly.

Whether radio communication is shielded by a metal obstacle.

Whether the distance between the detector and the GSM control unit is too far (try a
different location).

Whether the detector has been enrolled correctly (by connecting to a computer and
checking the registration code).

It is not possible to set the system during test mode and no alarm can be triggered
Azor regularly checks its connection with the detectors and the RFID tag reader. If the connection is
lost, a report is sent to the user (must be set) and information is also stored in the event memory. In
such a case please check the batteries in the detector or RFID tag reader concerned and check the
signal level (it may be influenced e.g. by changes in the room arrangement).