background image

 

External document 

File name: 

EYE-02 Wireless peripherals 

7/12 

URL: 

http://www.jablocom.com/download 

 

 

Wireless optical barrier JA-80IR 

JA-80IR optical barrier indicates breach into a protected area by crossing the infra-red line 
between the transmitter and the receiver. It is a product of company Optex supplemented with 
transmitters compatible with OASiS system. The transmitter and receiver are enrolled into the 
EYE-02 as one device each, together as two devices. There can be up to 60m distance between 
the units. JA-80IR can well be used in outdoor environment, it is protected from dust and 
flushing water. 

 

 

Mini-size wireless PIR motion detector JA-85P 

JA-85P is a mini-size PIR sensor suitable for protecting small rooms, it can be fit on ceiling.  

 

Mini-size wireless glass-break detector JA-85B 

JA-85B detects breaking of a window at the distance of up to 9 meters. It uses digital signal 
processing to avoid false alarms. 

 

3.1  Enrolling detectors 

 

Switch the camera into Enroll mode. Go to JabloTool via internet, tab Peripherals and click on Add new 
device. Other possibilities of switching camera to Enroll mode are described in chapter 1.2 

 

Press (any) button on these detectors: 

RC-80, RC-85, RC-87, RC-88, RC-89 

 

Insert battery into these detectors: 

JA-80D, JA-80IR, JA-80M, JA-80P, JA-80PB, JA-80S, JA-80W, JA-81M, JA-

82M, JA-82SH, JA-85B, JA-85P, JA-86P, JA-88P 

 

Plug the detector JA-80G into the mains. 

Detectors should be at least 1 meter away from the camera during enrolment. 

 

S

IRENS

 

The primary function of sirens is to inform visually and acoustically about Alarm events. 

 

 

Wireless internal siren JA-80L 

 JA-80L is a mains-powered (230V AC) siren with multiple functions.  

It sounds when Alarm in the camera occurs. The sounding can be activated and its length adjusted  
between 0 seconds and 4 minutes (go to JabloTool, Peripherals, then click on the enrolled JA-80L). 
The same length of alarm indication applies to the siren JA-80A if it is enrolled in same the camera. 
The siren confirms intruder alarm to the camera when it is disconnected from power during the time 
while it sounds an Alarm. 

Siren can signalize entrance or exit delay with a beep. Entrance and exit delay can be adjusted in 
JabloTool, tab Settings. 

Detectors from the group RC-8x and JA-8x can be enrolled into the siren. The siren plays a melody 
after the detector is triggered. Different melodies can be associated with different detectors. 

Example of use: Siren plays a melody after a (Doorbell button RC-89) at the entrance is pressed. 
The siren plays a different melody when that back door at home is open (Door detector JA-80M). 
The siren sounds Alarm when there is a fire in the kitchen (Fire and smoke detector JA-80S). More 
detectors can be enrolled at the same time.

 

Summary of Contents for EYE-02













Reviews: