External document
File name:
EYE-02 Wireless peripherals
12/12
URL:
http://www.jablocom.com/download
6.1 Enrolling thermostats into relays and enrolling relays into the camera
Relay can be controlled by both thermostat and the camera as described above. Follow these steps.
1. Enroll the thermostat into the controlling relay
Reset the relay AC-82, UC-82 (it is described in chapter 5.2.2, step 1) or AC-83 (it is described in the
chapter 5.2.3, step 1)
Switch the relay into enroll mode
o
AC-82 or UC-82: Repeatedly press the relevant X or Y button of the relay until all 4 LED lights
flash
o
AC-83: press the button X or Y, enroll mode is indicated by red LED number 2 or 4 flashing.
Insert battery into the thermostat TP-82 or TP-83.
2. Enroll the camera into the controlled relay (it is described in the chapter 5.2.2/5.2.3, steps 2 and 3).
Please note that thermostat cannot be enrolled into a relay where camera is already enrolled.
6.1.1
Enrolling thermostats into EYE-02 camera
1. Switch the camera into Enroll mode (it is described in chapter 1.2)
2. Insert battery into the thermostat TP-82 or TP-83
6.1.2
Enrolling thermostats and camera into wireless socket AC-88
1. First reset the socket. You can skip this step if no other device is enrolled there. The steps are described in
the chapter 5.2.1, step 1.
2. Plug the socket into the mains. LED indicator flashes once.
3. Right afterwards, press and hold the button on the socket until the LED indicator flashes once in intervals.
4. Insert battery into the thermostat TP-82 or TP-83
5. Press the socket button to finish the enrollment mode.
6. Unplug the socket from the mains
7. Plug the socket into the mains. LED indicator flashes once.
8. Right afterwards, press and hold the button on the socket until the LED indicator flashes once in intervals.
9. Send enrollment signal from the camera. Go to JabloTool via internet, tab Peripherals, press Add new
device. Other options are described in the chapter 4.1.1., step 3.
The wireless socket will now make contact if thermostat gives command to increase the temperature.