![background image](http://html.mh-extra.com/html/jabiru/3300/3300_installation-manual_626387022.webp)
Jabiru Aircraft
Pty Ltd
Installation Manual
Jabiru 3300 Aircraft Engine
REVISION
0
1
2
3
4
5
6
7
Dated : 1
st
Dec 2016
Page: 22 of 56
Figure 23. CHT Terminal Installation
Figure 24. CHT sensor between plugs
4.8.6
Exhaust Gas Temperature Gauge
Exhaust gas temperature (EGT) probes are to be fitted to each cylinder. The probe should be positioned
120mm from the port flange on the exhaust pipe of each cylinder.
It is important that this distance is accurately measured. Accurate positioning allows true comparison
between cylinders.
As the EGT probes as also thermocouples, as with the CHT, do not cut the wires shorter.
4.8.7
Engine monitoring systems.
When installing Engine monitoring systems always follow the manufactures instructions.
There is alternative means of getting a tacho signal, such as from the alternator or coils. See EMS
manufacture or Jabiru aircraft for details.
+