![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313147.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 147 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
The carburettor mount is sealed to the rear face of the plenum chamber using Loctite 515 and attached
using cap screws as shown in Figure 189. Apply Loctite 243 to these screws.
The carburettor coupling and carburettor can now be fitted as shown, making sure that the earth strap is
fitted between carburettor and plenum as shown. Do not use any lubricant on this connection as it can
result in the carburettor slipping out of the coupling and engine stoppage.
Figure 188
– Fitting Induction Pipes to Plenum Chamber
Figure 189
– Fitting Carburettor
Carburettor earth strap
Carburettor mount screwed
to plenum chamber