(ENGLISH)
J4C 20 TO 300 INSTALLATION INSTRUCTIONS
_
6
ACTUATOR ON-OFF OPERATIONAL STATUS
Actuator without power being supplied
Open Actuator
Close Actuator
Stop Actuator. PIN1 (N) or (-) + PIN2+3 (F) or (+)
connection (Standard mode only)
Actuator opening
Actuator closing
Actuator limiter function on, open direction
Actuator limiter function on, close direction
Motor off, after fixed time
Actuator in middle position. For a 3 position actuator only
Actuator without power, working with the
NO BSR system. Max.3 min.
Actuator without power and working with the
NC BSR system. Max.3 min.
LED STATUS
ACTUATOR WITH POSITIONER OPERATIONAL STATUS
Actuator without power supply
Actuator in the correct position
Actuator opening
Actuator closing
Actuator with positioner in self-adjustmen mode
Actuator with limiter function on, open direction
Actuator with limiter function on, close direction
Motor off, after fixed time
Higher instrumentation signal. Blocked actuator need RESET
No instrumentation signal detected or with 0mA
when 0-20mA or 0V when 0-10V.
Actuator without power supply. Working with BSR NO.
For 3 min Max.
Actuator without power supply. Working with BSR NO.
For 3 min Max.
LED STATUS