J 105, Owner'S Manual, Page: 38 / 52

J/105 Owner Guide ...................................................................................................................................................................................................................................................... 38
•
Do not stow combustible material in the engine space. If non-­‐combustible materials are
stowed in the engine space, they shall be secured against falling into machinery and shall
cause no obstruction to access into the space.
Specific Warnings
Never
•
Obstruct passageways to exits and hatches,
•
Obstruct safety controls, e.g. fuel valves, gas valves, switches of the electrical system,
•
Obstruct portable fire extinguishers stowed in lockers,
•
Leave the craft unattended when cooking and/or heating appliances are in use,
•
Modify any of the craft’s systems or allow unqualified personnel to modify any of the
craft’s systems,
•
Fill any fuel tank when machinery is running, or when cooking or heating appliances are
in use,
•
Smoke while handling fuel or gas.
Lightning Protection
The J/105 is grounded in accordance with ABYC and industry practice. The mast, shroud
chainplates, stemhead fitting, backstay fitting, engine, and electrical system are grounded to the
keel. In spite of this grounding, there can be no assurance that personnel or the boat will not
suffer injury if the boat is hit by lightning. The following are suggestions only and in no way
guarantee safety in the event of a lightning strike.
•
If possible, remain inside a closed boat during a lightning storm. Do not contact any
metallic objects inside or outside the boat.
•
Avoid contact with any items connected to the lightning conductive system (mast,
shrouds, etc) and especially in a manner to act as a bridge between them (mast to shroud,
etc).
•
Avoid swimming during a lightning storm.
•
If the boat is mildly struck by lightning, check all compasses and electrical gear to
determine that no damage or change in calibration has taken place.
•
Check all thru-­‐hull fittings, keel bolts, engine rubber gasket membrane, for leakage
(water).