7 |
P a g e
CONNECTION CONFIGURATION
Communicating with the JTECH-ENCH44 H.264 Encoder
You will need to utilize your computer's ethernet port in order to communicate with the
encoder.
CHANGING YOUR PC’S IP ADDRESS
You will start by changing the IP address of your computer to match the default IP address
scheme of the encoder (192.168.1.168) so that the two can communicate. This means we will
need to change your PC's ethernet IP address to
192.168.1.XXX
.
To do so navigate to -
Control Panel > Network and Internet > Network and Sharing Center
Then, on the left-hand side select
'Change Adapter Settings'
This will bring up a new window.
Summary of Contents for JTD-696
Page 1: ...1 P a g e JTD 696 JTECH ENCH44 4 Input H 264...
Page 6: ...6 P a g e TYPICAL APPLICATION...
Page 34: ...34 P a g e...
