16 |
P a g e
In this menu, you can customize your network settings for the encoder.
DHCP
- Disable/Enable - It is recommended you leave DHCP disabled and assign a static IP
address to your encoder so that you know where to access the WEB GUI.
IP
- This is the field where you will enter your new static IP address for the encoder that matches
your current network's scheme
Netmask
- Set the netmask based on your connected network. In the above example, our
network is Class C so our subnet mask is 255.255.255.0
Summary of Contents for JTD-696
Page 1: ...1 P a g e JTD 696 JTECH ENCH44 4 Input H 264...
Page 6: ...6 P a g e TYPICAL APPLICATION...
Page 34: ...34 P a g e...
