15 |
P a g e
If there is a device using the IP address 192.168.1.200 on your network, try to ping another IP
address like 192.168.1.201 until your results show “Destination Host Unreachable”.
Once you have found an unused IP address on your network, write this IP address down as it will
become the static IP address of your encoder. In the examples above, we know that the IP
address
192.168.1.200
is not being used by a device on our network and will become our
encoder’s static IP address.
ASSIGNING THE JTECH-ENCH44 A STATIC IP ADDRESS IN THE WEB GUI
In order for the JTECH-ENCH44 to operate correctly, the device needs to live on your existing
network and have access to the internet. The best way to ensure that these two things happen is
to assign your encoder a new static IP address.
Before you assign the encoder a static IP address, you will need to know the scheme of your
current network and ensure that the IP address it not being used. Please review sections
“Determining the IP Scheme of your Network” and “Locating an Unused IP Address on your
Network”.
Once you know the IP address you want to assign the encoder, navigate to the
'System' Tab >
'Network' menu.
Summary of Contents for JTD-696
Page 1: ...1 P a g e JTD 696 JTECH ENCH44 4 Input H 264...
Page 6: ...6 P a g e TYPICAL APPLICATION...
Page 34: ...34 P a g e...
