FAA Approved Installation Manual for the
Report No 908
EDM-900 and EDM-930
Page 24 of 56 Rev I
Primary Engine Data Management System
Date 1-18-2013
24.4.1
After you have collected your data
After you have collected your data…Entering / Editing Fuel Level Calibration Data
The Fuel Table Editor is a spreadsheet type format allowing you to easily see the volume and related calibration
values side by side. You can easily navigate through the cells to enter values.
1.
With power off, hold in
Button 3 (Button 1 being far left)
and then turn on power. Wait until you see ‘
Do
you agree with the disclaimer?
’. Tap
YES
if you agree and wish to continue.
2. Tap
YES
when you see ‘
Do you have table data?
’.
