M A I N T E N A NC E
Page 36
Maintenance measure
Interval
Comment
Check oil level for motor lubrication
Daily
(Section
Filling and adjusting oiler,
page 41)
(when operating with oiler)
Lubricate chain
As required
(Section
Lubricating the chain,
page 38)
Inspection measure
Interval
Comment
Check control equipment
Daily
(Section
Checking controls,
page 38)
Check braking function
Daily
(Section
Checking braking function,
page 37)
Lifting and lowering limiters
Daily
Replace buffer immediately if damaged,
(buffers), visual check
otherwise replace every 5 years
Lifting and lowering limiters
Check at least
(Section
Checking lifting and lowering limiters,
once annually
page 37)
Check EMERGENCY STOP button
Daily
Check chain
Every 3 months
(Section
Checking chain, chain sprocket and
chain guides,
page 46) in the case of wear promo-
ting conditions, reduce interval between checks
Check chain
Each time the chain is
(Section
Wear dimensions,
page 48)
and chain guides
changed
Check break with load
Every 250 hours,
The load must be braked reliably
At least once annually
(Section
Checking brake function,
page 37)
Check all bolted and pin
Every 250 hours,
connections
At least once annually
Check load hook
Every 250 hours,
(Section
Check dimensions,
page 47)
(load and carrying sides)
At least once annually
Check the motor
Every 250 hours,
Measure the lifting speed
At least once annually
Check the axial movement of hooks
Annually
(Section
Checking axial play,
page 48)
and eyes
Check service unit
Annually
(Section
Service unit,
page 39)
Check silencer for
Annually
(Section
Checking silencer
permeability
for permeability,
page 38)
Check overload protection
Annually
(Section
Checking and adjusting overload
protection,
page 52)
Check gearbox and perform
Every 800 hours,
lubricant change
At least every 5 years
Shaft connection,
Every 800 hours,
Check the rotor pinion shaft
At least every 5 years,
Renew grease lubrication
Every 250 hours,
(Section
Motor lubrication,
page 43)
of motor
At least every 5 years
Check compressed air connections
Annually
for damage
Check brake wear and motor
Every 800 hours,
(Section
Replacing brake disc, brake piston
vane wear
At least every 5 years
and vanes,
page 42)
