TA K I N G O U T O F O P E R AT I O N
Page 33
TA K I N G O U T O F O P E R AT I O N
If the hoist is to be take out of operation for a longer
period of time, it must be protected against corrosion.
Coat the chain and hook with a light oil film.
Move the load hook out of the lifting area, in order
to avoid hazardous situations.
Do not move against the lifting and lowering limiters
(emergency end-stop devices).
Depressurise the air line.
(see section
Storage conditions,
page 18)
DA N G E R O F I N J U R Y !
JDN Air Hoists must only be dismantled
by qualified personnel.
Depressurise the air line.
Provide a suitable working platform.
Loosen the union nut and remove the air hose.
Protect the air connection against the dirt ingress.
Detach the control hoses from the hoist.
Do not kink the control hoses.
Mark the connections.
Detach the strain-relief and hose carrier and remove
the control device.
Carefully detach the hoist and remove.
JDN Air Hoists contain a range of materials which, on
expiry of the service life, must be disposed of or recycled,
possibly in accordance with statutory legislation.
Please note the following list of materials used:
H O I S T
Ferrous materials
Steel
Nodular cast iron
Non-ferrous metals
Bronze
Aluminium
Plastics
Polyurethane
Polyoxymethylene
Polyvinyl chloride
Polyamide, glass-fibre reinforced
Natural rubber
Polypropylene
Phenol resin
Thermoset moulding compound
(Asbestos-free brake lining)
Synthetic rubber
F I LT E R S I L E N C E R /
S E R V I C E U N I T:
Zinc diecast
Brass
Nitrile rubber
Aluminium
Polypropylene
Polyurethane
Glass-fibre reinforced plastic
Steel
Polyacetal
Polyethylene
D I S P O S A L
D I S M A N T L I N G
S T O R AG E
S H U T T I N G D OW N
