J. D. NEUHAUS PROFI 25TI, Original Operation And Assembly Instructions

Page: 45 / 72

powered by air!
Page 45
MAINTENANCE
Inspection measure Interval Comment
Check sealing efficiency and function of control
valve
Annually
Check the state of the chain box
1
including mounting
Annually (Chain box, page 64)
Check for brake wear and motor vane wear Every 200 hours, at least
every 5 years
(Motor installation and inspection, page 50), replace
motor vanes every 5 years
In off-shore areas and other similar corrosive
environments, replace the chain regularly Every 5 years
Check gearbox and perform lubricant change Every 5 years
Check the rotor/pinion shaft connection and
lubricate with gear grease Every 5 years
Check the chain sprocket bearings
and lubricate if necessary
Every 5 years
Check chain sprocket and chain guides Whenever the chain is (Check dimensions, page 58)
Renew grease lubrication of motor
When required, at least
every 5 years
(Motor installation and inspection, page 50)
1
if fitted