J/80 Owner Guide 23
Copyright
©
J/Boats, Inc., 2007
0
4
C
0
4
C
Jib & Spinnaker System
Leading your Spinnaker Sheets
When setting up your spinnaker sheets for a typical port tack set on the J/80 use the
following diagram as a guide. 1) Both spinnaker sheets lead over the lifelines and
through blocks as shown. 2) Remember that the Tack Line (as shown below) is
always rigged over the top of Starboard spinnaker sheet. This ensures that after
hoisted, the spinnaker will be ready for “inside-out” jibes (between the headstay and luff
of the spinnaker).
•
Ronstan Jib Sheet Blocks w/Cars, mount on aluminum jib tracks. These
cars have an adjustment screw for forward and aft positioning on the
track.
•
Harken #2636 Carbo spinnaker turning blocks, mount on stern pulpit
bales.
•
Harken 2670 75mm Carbo ratchet blocks, mount on cockpit stanchion
legs (aft bale).
Summary of Contents for J 35
Page 1: ......
