12
March 1
st
, 2015
Firebricks installation.
Back firebricks installation.
1) Put 4 bricks «A» and 1 brick «C» to the middle
2) Begin to screw the 3 bricks screws in the hole for this
purpose, after insert split washer through the screw and do
not tight the screws now
3) Add two horizontal bricks «A» above de 5 previously placed.
To finish, tighten the 3 bricks screw
Side firebricks installation
1) Put 2 bricks «A» and 1 angled brick «E» beside the right air
corridor. ».
2) Screw the brick screw and insert split washer.
3) Tighten the screws on the air corridor
4) Repeat the 3 steps before to make the other side of the
stove.
Floor firebricks installation.
1) Put 2 bricks «A» in the bottom like in the picture.
2) After, insert 4 bricks «A» in front the 2 bricks previously
placed.
3) Insert 1 brick «A» to the right from the ash plug.
4) Insert 1 brick «D» to the left from the ash plug..
