izzy Atlantis IZ-9060, Instruction Manual, Page: 24 / 29

23
will appear on the screen.
4. Press consequently the “MODE” button (20) until the “Laundry” indication light (15) will turn
on.
5. The humidity percentage of the room is displayed on the screen (12).
Note: This mode does not dehumidify.
Note: After 24 hours of operation, the appliance switches off the “Laundry” function
and activates the “Dry” dehumidification function with a preset humidity selection of
60%.
Dehumidification & Fan function (DRY & FAN):
In this mode the humidity can be set like dehumidifying mode and when teh ambient
humidity is lower than setting, the fan will be running continuous.
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you have selected
will appear on the screen.
4. Press consequently the “MODE” button (20) until both the “Dry” (13) and Fan (14) indication
lights will turn on.
5. Press consequently the buttons “-” (18) or “+” (19) to adjust the humidity of your choice (35
to 80 per 5%).
Reflector moving function (SWING):
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you have selected
will appear on the screen.
4. Press consequently the “MODE” button (20) and select the desired function.
5. Press the “SWING” button (17). The reflector will start moving.
6. If you want the reflector to remain stable at some point, press the “SWING” button (17)
again in the desired position.
Timer function (TIMER):
Start-up programming:
1. Plug in the appliance. A “beep” will sound and the indicator lights on the control panel (1) will
turn on for 1 second and then turn off.
2. The screen (12) will display “
”.
3. Press the power button “ON/OFF” to turn on the appliance. The setting you have selected
will appear on the screen.
4. Press consequently the “MODE” button (20) and select the desired function.
5. Press the power button “ON/OFF” to turn off the appliance. The screen (12) will display “
”.
6. Press the “TIMER” button (16). The “Timer” indication light (10) will turn on.
7. “00” will flash on the display (12) for 6 seconds.
8. Press the “-” (18) or “+” (19) buttons consequently to set the time you want the appliance to
switch on the selected mode (0.5 to 24 hours).
9. The “Timer” indication light (10) will stay on.
10. The appliance will start working automatically after the selected time has elapsed.