izzy Atlantis IZ-9060, Instruction Manual, Page: 22 / 29

21
10. “Timer” indication light
11. “Tank Full” indication light
12. Display
13. “Dry” indication light
14. “Fan” indication light
15. “Laundry” indication light
16. “TIMER” button
17. “SWING” button
18. Humidity/timer “-” regulation button
19. Humidity/timer “+” regulation button
20. “MODE” button
21. Power button “ON/OFF”
Appliance installation
• Excess moisture will travel throughout your home, in the same way that cooking smells waft
to every room in the house. For this reason, the dehumidifier should be positioned, so that it
can draw this moist air towards it from all over the home.
• Alternatively, if you have a serious problem in one area you can begin by positioning the
dehumidifier close to this area and later moving it to a more central point.
• When positioning the dehumidifier, ensure that it is placed on a level surface and that there is
a minimum of 45cm of space on either side of the unit to allow for efficient airflow.
• The appliance must be installed, used and stored in an area that is greater than 9m
2
.
• The appliance is fitted with castors for extra mobility. If you move the unit, it should first be
switched off and the water tank emptied.
• We do not recommend the use of an extension lead, so please try to ensure that the unit is
sufficiently close to a fixed mains socket. If it is necessary to use an extension lead, please
ensure the diameter of the wires of the cable is at least 1mm².
• When the dehumidifier is in operation, outside doors and windows should be closed.
• • The appliance can operate normally at temperatures between 5
ο
C to 32
ο
C and at a relative
humidity of 30% to 90%.
Use of the dehumidifier
Before use :
• Remove the water tank (3) and remove the water tube (8), the water tank chip and the
socket.
• Put the water tank (3) in place and make sure it is securely fastened.