IXYS Zilog eZ80F91, Quick Start Manual

Page: 2 / 11

eZ80F91 Modular Development Kit
QS004611-0810 Page 2 of 10
Installation Overview
The eZ80F91 Mini Ethernet module is preinstalled on the eZ80Acclaim!
®
MDS adapter
board. To set up the development kit, install the ZDS II software. Connect the kit to PC,
using the USB Smart Cable or Serial Smart Cable, as appropriate. Connect power to the
adapter board.
Figure 1 displays the eZ80F91 Modular Development Kit.
Previous versions of the development kit used the Serial Smart Cable. New
kits as of June 2006 uses the USB Smart Cable.
Follow the steps below to install the cable available with your kit:
1. Install the ZDS II software as described in Installing the ZDS II Software and Kit
Documentation on page 3.
Figure 1. The eZ80F91 Modular Development Kit
2. Connect your PC to the eZ80Acclaim! MDS adapter board as follows:
(a) If you are using the Serial Smart Cable, follow the instructions in Connecting the
Serial Smart Cable to Your Computer on page 3.
(b) If you are using the USB Smart Cable (not included with this kit), follow the
instructions in Installing the USB Smart Cable on page 3.
3. Connect the 5 V DC power supply to the adapter board.
4. Connect the development kit to your PC and run the supplied sample project as
described in Running Sample Projects on page 6.
For complete details on developing an application for the development kit, refer to Zilog
Developer Studio II–eZ80Acclaim!
®
User Manual (UM0144), and eZ80F91 Modular
Development Kit User Manual (UM0170) .
Note: