IXXAT IEM-200 EtherCAT, Manual

Page: 157 / 178

Error handling
Copyright IXXAT Automation GmbH
157
IEM Manual, 1.5
0xb9702097 FUPM_k_SM_EVENT_WF_END This error means that the event during the wait for end of
FUP mechanism state is not defined.
FATAL
151 2
0xb9701098 FUPM_k_SM_EVENT_END This error means that the event during the successful end
of FUP mechanism state is not defined.
FATAL
152 1
0xb9702098 FUPM_k_SM_EVENT_END This error means that the event during the successful end
of FUP mechanism state is not defined.
FATAL
152 2
0xb9701099 FUPM_k_SM_EVENT_ERROR This error means that the event during the error state is
not defined.
FATAL
153 1
0xb9702099 FUPM_k_SM_EVENT_ERROR This error means that the event during the error state is
not defined.
FATAL
153 2
0xb970109a FUPM_k_SM_REQUIRE_NEW_DATA This error means that no data could be required of FUP
file during the firmware block reception.
FATAL
154 1
0xb970209a FUPM_k_SM_REQUIRE_NEW_DATA This error means that no data could be required of FUP
file during the firmware block reception.
FATAL
154 2
0xb970109b FUPM_k_SM_TRANSMISSION_ACTI
VE This error means that it was not possible to check if the
FUP file transmission is active.
FATAL
155 1
0xb970209b FUPM_k_SM_TRANSMISSION_ACTI
VE This error means that it was not possible to check if the
FUP file transmission is active.
FATAL
155 2
0xa970109c FUPM_k_SM_EVENT This error means that the sending of an event to the host
failed.
MINOR
156 1
0xa970209c FUPM_k_SM_EVENT This error means that the sending of an event to the host
failed.
MINOR
156 2
0xa970109d FUPM_k_CTRL_INIT_FSEEK This error means that it was not possible to set file pointer
in the control file during the initialization.
MINOR
157 1
0xa970309d FUPM_k_CTRL_INIT_FSEEK This error means that it was not possible to set file pointer
in the control file during the initialization.
MINOR
157 3
0xa970109e FUPM_k_CTRL_INIT_FWRITE This error means that it was not possible to write to the
control file during the initialization.
MINOR
158 1
0xa970309e FUPM_k_CTRL_INIT_FWRITE This error means that it was not possible to write to the
control file during the initialization.
MINOR
158 3
0x2970109f FUPM_k_CTRL_INIT_FCLOSE This error means that it was not possible to close to the
control file during the initialization.
MINOR
159 1
0x2970309f FUPM_k_CTRL_INIT_FCLOSE This error means that it was not possible to close to the
control file during the initialization.
MINOR
159 3
0x297010a0 FUPM_k_CTRL_INIT_FOPEN This error means that it was not possible to close to the
control file during the initialization.
MINOR
160 1
0x297030a0 FUPM_k_CTRL_INIT_FOPEN This error means that it was not possible to close to the
control file during the initialization.
MINOR
160 3
0x297010a1 FUPM_k_CTRL_INIT_MUTEX This error means that it was not possible to initialize the
mutex during the initialization.
MINOR
161 1
0x297030a1 FUPM_k_CTRL_INIT_MUTEX This error means that it was not possible to initialize the
mutex during the initialization.
MINOR
161 3
0x297010a2 FUPM_k_CTRL_INIT_MUTEX_RELE
ASE This error means that it was not possible to release the
mutex during the initialization.
MINOR
162 1
0x297030a2 FUPM_k_CTRL_INIT_MUTEX_RELE
ASE This error means that it was not possible to release the
mutex during the initialization.
MINOR
162 3
0x297010a3 FUPM_k_CTRL_RESET_MUTEX_WA
IT This error means that it was not possible to set the mutex
to wait state during reset.
MINOR
163 1
0x297030a3 FUPM_k_CTRL_RESET_MUTEX_WA
IT This error means that it was not possible to set the mutex
to wait state during reset.
MINOR
163 3
0x297010a4 FUPM_k_CTRL_RESET_MUTEX_RE
LEASE This error means that it was not possible to release the
mutex to wait state during reset.
MINOR
164 1
0x297030a4 FUPM_k_CTRL_RESET_MUTEX_RE
LEASE This error means that it was not possible to release the
mutex to wait state during reset.
MINOR
164 3
0xa97010a5 FUPM_k_CTRL_GET_MUTEX_WAIT This error means that it was not possible to set the mutex
to wait state during getting information of control file.
MINOR
165 1
0xa97030a5 FUPM_k_CTRL_GET_MUTEX_WAIT This error means that it was not possible to set the mutex
to wait state during getting information of control file.
MINOR
165 3
0xa97010a6 FUPM_k_CTRL_GET_MUTEX_RELE
ASE This error means that it was not possible to release the
mutex to wait state during getting information of control
file.
MINOR
166 1
0xa97030a6 FUPM_k_CTRL_GET_MUTEX_RELE
ASE This error means that it was not possible to release the
mutex to wait state during getting information of control
file.
MINOR
166 3
0xa97010a7 FUPM_k_CTRL_SET_MUTEX_WAIT This error means that it was not possible to set the mutex
to wait state during setting information of control file.
MINOR
167 1
0xa97030a7 FUPM_k_CTRL_SET_MUTEX_WAIT This error means that it was not possible to set the mutex
to wait state during setting information of control file.
MINOR
167 3
0xa97010a8 FUPM_k_CTRL_SET_MUTEX_RELE
ASE This error means that it was not possible to release the
mutex to wait state during setting information of control
file.
MINOR
168 1