IXXAT IEM-200 EtherCAT Manual Download Page 154

Page: 154 / 178

Error handling

154

IEM Manual, 1.5

0x29601033

FUPM_k_ERR_PARSE_FL_SIZE

Parser error in the flash info block at the flash size field.

MINOR

0x29601034

FUPM_k_ERR_PARSE_NO_FL_BLO
CKS

Parser error in the flash info block at the number of flash
blocks field.

MINOR

0x29601035

FUPM_k_ERR_PARSE_FL_BLOCK_
SIZE

Parser error in the flash info block at the flash block size
field.

MINOR

0x29601036

FUPM_k_ERR_PARSE_FL_REGION
_OFS

Parser error in the flash info block at the flash region
offset field.

MINOR

0x29601037

FUPM_k_ERR_FLASH_INFO

Flash info in the firmware update file does not match to
the flash device on the IEM.

MINOR

0x29601038

FUPM_k_ERR_NO_FL_DEL_BLOCK
S

The number of the flash delete blocks in the firmware
update file is too large. Only (0) flash delete block is
allowed.

MINOR

0x29601039

FUPM_k_ERR_FL_DEL_ADDR

Parser error in the (0) flash delete block at the flash block
address field.

MINOR

0x2960103a

FUPM_k_ERR_FL_BLOCK_DEL

The erasing of the flash block defined by the (0) flash
delete block in the firmware update file failed.

MINOR

0x2960103b

FUPM_k_ERR_BCC_REQ_STATE

The transmission of the BCC response send in the (0)
module control state machine state failed.

MINOR

0x3960103c

FUPM_k_ERR_INIT

The firmware update initialization failed.

FATAL

0x1960103d

FUPM_k_ERR_NO_FIRMWARE

No firmware is available in the firmware update file.

INFO

0x2960103e

FUPM_k_ERR_FW_FILE_FTP

The firmware update file was changed in the (0) module
control state during the firmware update.

MINOR

0x2960103f

FUPM_k_ERR_BCC_RESP_SEND_T
IMO

BCC response send timeout happened in the (0) module
control state.

MINOR

0x29601040

FUPM_k_ERR_BCC_NOT_INITIALIZ
ED

BCC is not initialized in the (0) module control state.

MINOR

6.5.29 COM_k_UNIT_ID_MC_FUPMv2 (unit id 151)

Error Code

Define

Description

Error

Class

Unit

Err

File

0x29701001

FUPM_k_FLASH_OPEN

This error means that the flash could not be opened.

MINOR

0x29701002

FUPM_k_FLASH_GET_INFO

This error means that the flash info query failed.

MINOR

0x19701003

FUPM_k_FLASH_CLOSE

This error means that the flash could not be closed. Be-
fore closing, it must be opened successful via
FUPM_AcsFlashOpen().

INFO

0x29701004

FUPM_k_FLASH_READ_MERGE

This error means that flash read access during flash block
merging failed.

MINOR

0x29701005

FUPM_k_FLASH_WRITE

This error means that flash write access failed.

MINOR

0x29701006

FUPM_k_FLASH_ERASE

This error means that the erase of a flash block failed.

MINOR

0x29701007

FUPM_k_FLASH_READ_VERIFY

This error means that flash read access during block
verification failed.

MINOR

0x39701008

FUPM_k_FLASH_BLOCK_VERIFY

This error means that flash block verification failed.

FATAL

0x39701064

FUPM_k_SM_INIT

This error means that the initialization of FUPM failed.

FATAL

100

0x39702064

FUPM_k_SM_INIT

This error means that the initialization of FUPM failed.

FATAL

100

0x39701065

FUPM_k_SM_RST_CTRL_FILE

This error means that the control file could not be reset

FATAL

101

0x39702065

FUPM_k_SM_RST_CTRL_FILE

This error means that the control file could not be reset

FATAL

101

0x29701066

FUPM_k_SM_SEND_EVENT_RST_H
OST

This error means that the host could not be informed
about the reset of FUPM.

MINOR

102

0x29702066

FUPM_k_SM_SEND_EVENT_RST_H
OST

This error means that the host could not be informed
about the reset of FUPM.

MINOR

102

0x99701067

FUPM_k_SM_FILENAME_SIZE

This error means that the new file name is too long.

INFO

103

0x99702067

FUPM_k_SM_FILENAME_SIZE

This error means that the new file name is too long.

INFO

103

0xb9701068

FUPM_k_SM_STATE

This error means that the state machine is in an unde-

FATAL

Summary of Contents for IEM-200 EtherCAT



















































































































































































Search results

Summary of Contents for IEM-200 EtherCAT

Reviews:

Related manuals for IEM-200 EtherCAT

Brands by name

Popular brands

IXXAT IEM-200 EtherCAT, Manual

Search results

Summary of Contents for IEM-200 EtherCAT

Reviews:

Related manuals for IEM-200 EtherCAT

Brands by name

Popular brands