Configuration tool
6.1.5 Downloading a configuration
To save a configuration in the device, please select
”Device -> Download configu-
ration“
.
6.1.6 Disconnecting
The connection between the device and the configuration tool can be interrupted
at any time via
”Device -> Disconnect“
.
6.2 Configuration
cable
In order to enter the configuration mode, a connection cable with Sub-D9 sock-
ets at both ends is required for the serial port. The connection of the two Sub-D9
sockets is listed in table 6-1. The connector allocation corresponds to that of a
serial laplink cable. This cable is also suitable for normal operation mode.
Sub-D9
socket 1
Pin Pin Sub-D9
socket 2
DCD
1 4 DTR
RX
2 3 TX
TX
3 2 RX
DTR
4 1 DCD
GND
5 5 GND
DSR
6 -
RTS
7 8 CTS
CTS
8 7 RTS
RI
9 9 RI
Table 6-1: Connection list of the configuration cable
Copyright IXXAT Automation GmbH
CANlink II - Manual, V1.3
37
Summary of Contents for CANlink II
Page 6: ......
