Configuration tool
6 Configuration
tool
6.1 Configuration with Windows application
The Windows application CANL2cfgGUI.exe is available as an alternative to the
Windows console program. The program allows the user to configure the device
by means of a graphic interface.
The Windows application displays the configuration file on four configuration
pages. Each page lists parameters of the relevant range.
•
“General“
– configuration name, active operation mode, timeout.
•
“RS232“
– parameters for serial port (baudrate, data flow control etc.).
•
“CANlink“
– parameters for CAN-on-RS232 operation mode (TxID, RxID,
baudrate etc.).
•
”COPlink“
– parameters for CANopen-on-RS232 operation mode (TxPDO,
RxPDO, node number etc.).
6.1.1 Default configuration
The original configuration of the CANlink II can be recovered via the menu
“File -
> New“
. This can then be written in the device or in a file.
Copyright IXXAT Automation GmbH
CANlink II - Manual, V1.3
33
Summary of Contents for CANlink II
Page 6: ......
