e n g l i s h
|
11
Ixtur LI-120
ATTENTION! The magnet state always changes automatically to 'magnet OFF' (released) after the lift when
the attached load is set down and the lifting shaft returns to DOWN-position. See chapter 'Automated Use'
earlier in this manual.
ATTENTION! The left operation button cannot be used when the shaft is in UP-position. The magnet state
cannot be changed to 'magnet OFF' (released) during the lift.
Do not detach the lifting shackle of the device when you connect the device to the crane.
Ensure always before lifting that the magnet state is ON (attached) i.e.
green indication light is
blinking.
Battery Status Check
Press the right operation button for 10 seconds. In this functional mode, blue light is on and the right green
indication light blinks 2 to 9 times depending on the battery status, and after that the device returns to its
normal use state. The number of green blinks indicates the battery charge percentage; 2 = 20%, 3 = 30% ... 9
= 90%