IWILL P4G Series, User Manual

Page: 97 / 110

6: Using The Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 6•3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Indicator LEDs
The motherboard front panel features connector supports
three system status indicator LEDs:
• Power Status LED Indicator
Lights when the system is turned on.
• System Hard Disk Drive Activity LED Indicator
Flashes during hard disk drive access.
• Power Conservation Mode LED Indicator
Lights to indicate the system is in a Suspend state
power conservation mode.
Most system housings will have all of these LEDs mounted
in the housing’s front panel.
Additional System Features
This motherboard supports the IWILL “FI Panel” front
panel extender. The FI Panel connectors on the
motherboard connect to cables from the FI Panel, which
mounts in a 5¼-inch bay in the system housing and in-
cludes the following features:
• Compact Flash reader
• Memory Stick reader
• Secure Digital Card reader
• Line Out audio jack
• Microphone jack
• Two Hi-Speed USB 2.0 ports
Follow the instructions that come with the FI Panel to
install and use the device. The FI Panel is an optional
purchase.
USB 2.0:
USB 2.0 support is pro-
vided for Windows 2000
and Windows XP. Under
other operating systems
the USB ports will func-
tion as USB 1.1 ports.