IWILL P4G Series, User Manual

Page: 69 / 110

5: System Configuration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 5•5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
mPGA478B
PROM
ISE
Serial ATA
P4GS
J1
JCDIN1
JAUX1
JAUDIO1 AGP
PCI1
PCI2
PCI3
PCI4
PCI5
JUSB1
JDIMMVOLT1
JCMOS1
SHATA1
JUSB3
JUSBV1
J2
JPANEL1
IDE4
IDE3
JSFAN1,2
IDE1,2
ATXPWR2
FDD1
JP1
JGAME1
JCOM2 U23
JP2
JCFAN1
DDR1 DDR2
ATXPWR1
JPSKMV1
CPU1
Onboard IDE Connectors
Each channel connector
supports one IDE channel
with two drives, a Master
and a Slave. The Master
drive connects to the con-
nector on the end of the
ribbon cable. The Slave
drive connects to the con-
nector in the middle of
the ribbon cable.
Note:
The ribbon cable used
must support the transfer
mode of the fastest device
connected to it to avoid
degraded performance.
The two ATA-133 channels
require ATA-133 cables.
Floppy
connector
IDE1
Primary
Channel IDE2
Secondary
Channel
Floppy Drive Connector
The floppy drive connec-
tor supports two floppy
disk drives. The first drive,
Drive A:, connects to the
connector on the end of
the floppy drive connec-
tor cable. A second drive,
Drive B:, would connect to
the middle connector on
the cable although sys-
tems now commonly only
have one floppy disk drive.