17
Chapter 3
Hardware Setup
Install Memory Modules
IWILL mP4S comes with PC133 memory module (DIMM) sockets. These
sockets support up to 3GB system memory using unbuffered ECC or
non-ECC PC133 memory.
Make sure to unplug the power supply before adding or removing
memory module. Failure to do so may cause damage to
motherboard.Follow these steps to install memory modules.
Align the "Notch" on the DIMM memory to
the "Break" on the Socket.
Firmly insert the DIMM into the socket until
the retaining clips snap back in place and
the DIMM is properly seated.
Make sure the memory is locked on the
DIMM socket with "Both Chips"
Step: 3
Step: 4
Unlock a DIMM socket by pressing the
retaining clips outward.
Step: 1
Step: 2
Notch
Breaks