46
Chapter 4
BIOS Setup
Set Supervisor/ User Passw ord Setting
These setup pages are used for password setting. When a password
has been enabled and the Security Option field is set as Setup, you will
be required to enter the password every tim e you try to enter BIOS Setup
program . This prevents an unauthorized person from changing any part
of your system configuration. Additio nally, if the Security Option field is
set as Boot, the BIOS will request a password every tim e your system
boot. This would prevent unauthorized use of your com puter.
If you wish to use this function, bring the cursor to this field, then press
<E nter>. The com puter will display the m essage, “E nter P assword”.
Type your password and press <E nter>. After the m essage onfirm
P assword” is displayed, re-type your password. The Supervisor
P assword function will be in effect after you save and exit setup.
To disable a password, bring the cursor to this field, then press <E nter>.
The com puter will display the m essage, “E nter P assword”. P ress
<E nter>. A m essage will confirm that the password is disabled. Once
the password is disabled, the system will boot and you can enter setup
program freely.
CMOS Setup Utility-Copyright(c) 1984-2001 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
ESC: Quit
F10: Save & Exit Setup
Time, Date Hard Disk Type...
: Select Item
IWILL Smart Setting
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Enter Password:
