18
Chapter 4
BIOS Setup
If the system is no longer able to boot after changing the settings, the only
way to clear the data stored in R TC C MOS. To reset the R TC C MOS data,
take the JP 1 jum per cap off pins 1-2, place onto pins 2-3, an d then place
back onto pin s 1-2 again. it returns the R TC to the default se tting. Then,
get into the BIOS setup program , ch oose Load Fail-Safe D efaults ; Load
Optim ized D efaults, and select IWILL’
s E ngineers to set default settings in
your C MOS.
Using BIOS setup program
U p
Move to the previous field
Down
Move to the next field
Left
Move to the field on the left hand side
Right
Move to the field on the right hand side
<Esc>
Quit from setup program without saving changes,
ro Exit from current menu page and return to
main menu page
<PgUp>or<+>
Select the previous value for a field.
<PgDn>or<->
Select the next value for a field
< F 1 >
General Help
< F 2 >
Item Help
< F 5 >
Previous Values
< F 6 >
Fail-Safe Defaults
< F 7 >
Optimized Deaults
<F10>
Save the current value and exit setup program
