38
Chapter 4
BIOS Setup
APM Suspend Timer
This field specifies the tim e the system enters power-saving
m ode. It is available only when the P ower Managem ent field is
set to U ser D efine.
[1Min,2Min,4Min,8Min,12Min,20Min,30Min,40Min,1H our,
D isabled
(Default Value)
]
PWR-Off Mode by PWR-BTTN
This field specifies the function of power button.
Instant-Off
(Default Value)
:
When power button pressed, the system turns off im m ediately,
D elay4 Sec:
After the power button has been pressed and held for four
seconds,the system turns off.
Wake up by PCI card
When enabled , you can "wake-up " your system using P C I rev.2.2
card , when a "P ME " event occuring.
[E nabled,D isabled
(Default Value)
]
Wake up by Ring / LAN
When enabled , the system can " power-on" or "wake-up" through
LAN (Local Area N etwork ) or an external m odem connected to the
P C .
[E nabled,D isabled
(Default Value)
]
PWROn / Resume by Alarm
When enabled , you can set the date and tim e to autom atically
"power-on" or "wkae-up" your P C (sim ilar to an alarm clock).
E nabled:
Setting to D ate (0-31) and Tim er (hr,m in,sec) to power-on the P C .
When date is set to 0, the Tim er is set for every day.
D isabled
(Default Value):
D isable R TC alarm function.
IRQ1~IRQ14
If set to E nab led, the spe cified IR Q l ine wi ll pre vent the sys tem
from entering power saving m odes.
E nables or disables the m onitoring of the specified IR Q line.
