48
3.10.5 BIOS-ROM Flash Protect
When Non-Flash, BIOS will not be upgraded.
Options
Non-Flash(*)
Flashable
3.11 SUPERVISOR / USER PASSWORD SETTING
These setup pages are used for password setting. Note that the User Password can enter BIOS setup
program, but has no rights to change the value of any fields.
When a password has been enabled and the Security Option field is set as Setup, you will be
prompted to enter the password every time you try to enter BIOS Setup program. This prevents an
unauthorized person from changing any part of your system configuration. Additionally, if the
Security Option field is set as Boot, the BIOS will request a password every time your system boot.
This would prevent unauthorized use of your computer.
To disable a password, just press <Enter> when you are prompted to enter the new password. A
message will confirm that the password is disabled. Once the password is disabled, the system
will boot and you can enter setup program freely.
3.12 IDE HDD AUTODETECTION
This setup page detects and configures hard disk parameters automatically.
3.13 SAVE & EXIT SETUP
Save current CMOS value and exit BIOS setup program.
3.14 EXIT WITHOUT SAVING
Abandon all CMOS value changes and exit BIOS setup program.
