EN
2. Installation instructions
2-1.
Layout for Front and Rear panel
1 Shield gas connector
Is connected to the gas input pipe of torch.
2 Negative output
The welder’s negative polarity output.
3 Aero socket
Is connected to torch switch control wire.
4 Positive output
The welder’s positive polarity output.
5 Shield gas input joint
To connect one head of the gas hose while the other head is
connected to argon gas cylinder.
6 Power source input
To connect power source.
7 Power source switch
Switch to “ON”, the welder is turned on, while switch to “OFF”, the
welder is turned off.
7
6
