HU
EN
7
1
Output current knob: it sets the output cutting current
2
Manometer: it shows the air pressure (bar) during the cut
3
Cutting mode selector: grating, standard stand off, gouging
4
Earth clamp socket
5
Pressure regulator knob
6
Remote control socket
7
Torch connector
8 On/off
switch
9
Control led lights
WARNING:
the plasma cutting power source is equipped with a PT100 plasma
torch. This torch has to be considered as integral part of the machine and its
functioning and safety are guaranteed only with the original torch. For any
spare parts refer to the appendix list.
The torch is equipped with a safety circuit which prevents any accidental
contacts with conductive elements: the machine does not work if the safety
circuit is activated.
Switch always the machine OFF when working on the torch.
The machine can work in three different modes:
7.
STANDARD STAND OFF – GRATING – GOUGING
SOLID CUT
GOUGING APPLICATION
GRID CUT
