Rev 2.0
Page 27 of 164
Generic Qseven Carrier Board Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
194
SPKR/
GP_PWM_OUT2
Input
3.3V CMOS
PWM used to control the LVDS LCD
Backlight.
195
FAN_TACHOIN/
GP_TIMER_IN
Output
3.3V CMOS
Fan tachometer input.
Default NC.
Connected to 5
th
Pin of SDVO Header
(J47) through resistor and default not
populated.
196
FAN_PWMOUT/
GP_PWM_OUT1
Input
3.3V CMOS
Fan PWM input.
Default NC.
Connected to 7
th
Pin of SDVO Header
(J47) through resistor and default not
populated.
197
GND29
Power
0V
Ground.
198
GND30
Power
0V
Ground.
199
SPI_MOSI
Input/Output
3.3V CMOS
SPI Master Out Slave In.
Connected to 4
th
Pin of SPI Header (J29).
200
SPI_CS0#
Input
3.3V CMOS
SPI chip select 0.
Connected to 1
st
Pin of SPI Header (J29).
201
SPI_MISO
Input/Output
3.3V CMOS
SPI Master In Slave Out.
Connected to 2
nd
Pin of SPI Header
(J29).
202
SPI_CS1#
Input
3.3V CMOS
SPI chip select 1.
Connected to 7
th
Pin of SPI Header (J29).
203
SPI_SCK
Input
3.3V CMOS
SPI clock input.
Connected to 5
th
Pin of SPI Header (J29).
204
MFG_NC4
Output
3.3V CMOS
JTAG Reset Output.
205
VCC_5V_SB1
Power
5V
Standby Power Supply.
206
VCC_5V_SB2
Power
5V
Standby Power Supply.
207
MFG_NC0
Output
3.3V CMOS
JTAG Test Clock.
208
MFG_NC2
Output
3.3V CMOS
Debug UART RX data line UART2_RXD
(EIM_D27).
209
MFG_NC1
Input
3.3V CMOS
Debug UART TX data line. UART2_TXD
(EIM_D26).
210
MFG_NC3
Output
3.3V CMOS
JTAG Test Mode Select.
211
VCC1
Power
5V
Input Supply Voltage.
212
VCC2
Power
5V
Input Supply Voltage.