11
● To protect your hands and fingers, always wear gloves.
● Do not wash this product as a whole.
If water enters the gas line, gas will no longer come out, which
may cause rust.
● Always remove the canister before inspections and maintenance.
● Wait until the main unit has cooled down before inspecting
and maintaining the product.
● Never disassemble the gas line section.
● If there is a spillover during use, please clean burner.
Maintenance and inspection after use
Inspection
Maintenance method
Precaution
Spillovers of food
or liquid
Wipe off the spillover with a dry cloth. If the stain is
obstinate, please use mild detergent. And wipe off
totally with dry cloth.
Moisture and spillovers may cause malfunction, rust or failure.
Please clean inside and outside frequently. Do not move
electrode or flame rod.
If burner ports are
blocked
Clean with a brush and/or small needle.
(Do not move electrode or flame rod.)
It may cause incomplete ignition or irregular flames. Please
clean burner frequently.
Food particles on
electrode
(burner won’t ignite)
Please remove particles from electrode with dry cloth.
(Do not move the electrode.)
If there is a stain on electrode, it may cause hindered ignition.
During maintenance, if the ON/OFF knob rotates to “ON”
position, it may cause electric shock.
Food residue on
stove
Please wipe off with dry cloth. If the stain is set, use
mild detergent with water and then dry.
Do not use thinner, gasoline, polishing powder, nylon brush or
metal brush. This may cause damage to the machine.
When the product is not used for a long time
Cautions regarding time-related deterioration of
this product
●Confirm there are no food particles causing blockage and the unit is dry.
● Separate the canister from the unit. Do not store when these two
products are connected.
● When this product cools down, put into carrying case and store in a dry
place. Never leave the unit outdoors without it being in the carrying case.
● Please perform regular inspection and maintenance to prevent product
from rusting.
●Do not use any lubricants on this product.
Rubber parts are used in the gas connection opening of this product.
Regardless of frequency of use, rubber parts deteriorate over time.
Please consider replacing this product 10 years after manufacture.
●The manufacture date is listed on the rating plate.
Warranty and Repair
LIMITED WARRANTY INFORMATION
REPAIR (Out of Warranty)
To view our limited warranty information, visit our website at www.iwatani.
com/product-warranty, call us at 1-713-965-9970 or mail a written request
including your name and return mailing address to:
Iwatani Corporation of America
ATTN: Product Warranty Request
2200 Post Oak Blvd., Suite 1150 Houston, TX 77056.
Refer to the section “Troubleshooting” (page 12) and check the
product again. If your product is malfunctioning, contact us through
www.iwatani.com/contact or at 1-713-965-9970 with following
information:
●Your name, address and daytime phone number
●Product name and model number (on the rating plate)
●Description of the problem (in as much detail as possible)
Cautions during inspection and maintenance
Inspect and maintain the product after use.
