background image

10

 Caution

Do not use deformed canisters

(Doing so may lead to a gas leak)

Inspect stored canisters from time to time, 

always check that rusting canisters are free from 

gas leaks, and use them as soon as possible

*Even if a canister does not exhibit rusting, do not use 

a canister that has been stored for an extended period 

(more than 6 or 7 years as a rough guide).

Please use dedicated canister

Please use dedicated canister marked with “Iwatani Butane 

Fuel” or “FORE WINDS Butane Fuel”. If other canisters are 

used, it may cause gas leak or abnormality of operation.

Inhalation risk

Do not intentionally suck gas from the canister, as this 

may lead to suff ocation or death due to lack of oxygen.

Do not subject the canister to strong impacts

The canister may become damaged or ignite due to a gas 

leak if it suff ers an impact from a falling object.

Do not put the canister near a 

heat source

Do not put the canister in a place near 

a heat source. The pressure inside 

the canister may cause the canister to 

explode.

When storing the canister, 

avoid fl ames and direct sunlight

Keep the canister with canister cap 

fi tted in a place under 104˚F/40˚C where 

it is airy and with little humidity. Keep 

away from fl ame and direct sunlight.

 Handling the Canister

Instructions and warnings expressed on the canister should be read thoroughly.

Before using, remove the canister cap. Before storing the canister, replace the canister cap.

 Warning

Be sure to follow the instructions below to avoid the risk of fi re or explosion.

Do not throw the canister 

into a fi re

Do not throw the canister into a fi re. 

It will cause an explosion.

Proper disposal of canister

● Empty canister should be disposed 

of according to the rules and 

regulations of your city/town. Make 

sure can is completely empty before 

disposing of it.

● Shake the canister, if there is liquid 

still inside, please use it up before 

disposing.

Keep your head and hands away from the 

burner head

(Fire may cause an burns)

Ventilate during use

Pay careful attention to ventilation.

When the stove does not ignite on the fi rst 

attempt, be careful of ignition

Before igniting the second time, make sure there is no smell of 

gas. The escaped gas may cause a fi re. Wait at least 1 minute 

before retries.

After use, remove the canister

After use, always remove the canister from the main unit 

to prevent fi re. If this product is stored with the canister still 

installed and something turns the ON/OFF knob, there is the 

potential of a gas leak or ignition, which is extremely dangerous.

While stove is in use, periodically check to 

see the fl ame is visible

 Warning

Never modify or disassemble this product

(Disassembly could cause unexpected circumstances, 

such as death from carbon monoxide poisoning or a 

gas leak, failure, or fi re)

During and for some time after use, do not 

touch other than the ON/OFF knob

(You may be burned if you touch other parts)

Carry out the following procedure during 

abnormalities or emergencies

Examples of abnormalities) Strange noises or smells, red fl ame, etc.

  Set the ON/OFF knob to the “OFF” position to 

extinguish the fl ame.

  Remove the canister from the main unit. (page 6)

  Follow “Troubleshooting” (page 12).

Do not hold the handle and swing it or 

move it strongly

(Unexpected accidents may occur due to part damage or other problems)

 Caution

If the stove falls or receives a strong impact, stop using it

Even if the exterior is not damaged, interior mechanisms may be damaged.

Even if the exterior is not damaged, please contact your place of purchase or our customer consultation center.

Summary of Contents for Fore Winds FW-FS01













Reviews: