background image

2

 Danger

This symbol indicates matters that may lead to death, serious injury or 

fire if ignored or incorrectly handled.

 Warning

This symbol indicates matters that may lead to imminent risk of death or

serious injury if ignored or incorrectly handled.

 Caution

This symbol is displayed along with instructions that, if ignored, and if the

device is inappropriately used, may lead to the user suffering an injury or

material damage.

 

Table of contents

Names and uses of parts ································································· 3

● Specifications

·············································································· 3

● Assembly method

 ········································································ 4

● Ignition, adjusting the heating power, and extinguishing the flame

 ·········· 6

● Storage method

 ··········································································· 7

Usage precautions ········································································ 8

● Handling the Canister

 ······························································· 10

Maintenance and inspection after use ················································11
Warranty and Repair ······································································11
Troubleshooting ··········································································· 12

Be sure to read this Instruction Manual before use.

<Before use>

In order to ensure safe and correct usage of this product as well as to prevent injury or physical damage 

to you and others, there are many symbols in the instruction manual to explain the product. The symbols 

and their meanings are explained below. Please ensure you have carefully read and understand the 

content before reading the main text.

<These symbols have the following meanings>

General danger, 

warning or caution

Do EXACTLY 

as instructed

Prohibited

Do not touch

Do not 

disassemble

Summary of Contents for Fore Winds FW-FS01













Reviews: